Technical Specifications and Application of the 1200W 650mm 220V Halogen IR Lamp

September 4, 2026

Let’s talk about the 1200W 650mm Halogen IR Lamp

If you need heat—and you need it now—this is the tool for the job. We built this lamp specifically for those moments when you can’t afford to wait around for the air to warm up. It’s all about shortwave radiation. Instead of heating the room, it punches straight through your materials. It’s fast. Really fast. And that changes everything for your production speed. The Nitty Gritty on Power At 1200W and 650mm long, you get a nice, steady line of heat. Since it runs on 220V, you can plug it right into most industrial grids. No messy transformers, no extra gear. The best part? The filament hits its peak temperature in a matter of seconds. This means your cycle times drop, and your line keeps moving. Why the Halogen and Quartz Matter Ever notice how some lamps dim or get cloudy over time? We fixed that. We use a halogen gas fill that basically “cleans” the tungsten filament as it works, keeping the glass crystal clear. The quartz tube is the real hero here. It takes the brutal heat without warping, so you get the same punch of IR energy from one end of the 650mm tube to the other. Getting it Installed (and keeping it alive) This is a great drop-in replacement if you’re running PET blowing or plastic curing ovens and your old tubes are shot. It just works. But here is the thing: this lamp is intense. Because it puts out so much energy, your reflector needs to be spotless. If it’s dirty or pitted, you’re just wasting heat. And please,**do not touch the glass with your bare hands.**The oils from your skin create tiny hot spots. When the lamp fires up, those spots can cause the quartz to crack or burn out way too early. One last tip: check your mounting brackets. These things expand when they get hot, and you don’t want them putting pressure on the ends of the tube. Give them a little breathing room.