Let’s talk about our 950mm IR Halogen Lamps
If you’re running a high-output industrial setup, you know the struggle of getting heat where it needs to be—fast. That’s why we built these 2000W, 415V lamps. They’re designed to hit hard and hit fast across a long, linear footprint. The 415V rating is the real secret here. Since they’re built for three-phase industrial grids, you can skip those bulky, expensive step-down transformers for every single lamp. It just makes the whole setup cleaner. The perks of going high-voltage Here’s the thing: when you bump up the voltage, you drop the current. That means you don’t have to wrestle with massive, thick cables, and you won’t deal with that annoying voltage drop when you’re running long banks of heaters. Plus, at 950mm, you’re spreading that heat over a wide area. No more worrying about weird hotspots ruining your workpiece. Quartz, Halogen, and a big warning We use quartz glass to keep the halogen cycle humming. The gas stops the tungsten filament from evaporating and gunking up the walls of the tube. This keeps the glass crystal clear and ensures the shortwave IR hits your material directly. It doesn’t waste time heating up the air; it goes straight into the product. But listen—wear gloves. Seriously. Even a tiny bit of oil from your skin on that quartz creates a hot spot. If that happens, the bulb will pop way sooner than it should. Making them work for you These are pretty much plug-and-play for most 950mm IR ovens or PET blowing machines. You’ll love how quickly they ramp up to temperature. Just keep an eye on your reflectors. If they’re pitted or oxidized, you’re basically throwing a chunk of that 2000W right into the oven walls instead of your product. And one last tip: make sure your cooling fans are up to the task. These things get hot, and you don’t want to find out the hard way that your sockets are melting.